Sparkies aim to call you within the hour.
Get matched

Before you buy

Brooks smoke alarmsMains or sealed battery, with smoke and heat options.

Brooks Australia sells home smoke alarms under its FireAlarm range, with model codes starting EIB. The range splits into 230-volt mains alarms, which a licensed electrician installs, and battery alarms with a non-replaceable 10-year lithium battery. Brooks also makes multi-sensor alarms that combine photoelectric smoke and heat sensing.

Updated 29 October 2026 · Written by the Sparky Next Door team · How we check our facts

The EIB3016: Brooks' 230-volt photoelectric alarm

The EIB3016 runs on mains power, with a built-in, non-removable rechargeable lithium backup rated for 10 years. If the power fails, Brooks says the battery can keep it going for up to 6 months, or up to 3 months in a wireless setup.

It hard wires to up to 12 interconnected devices. To link wirelessly instead, it needs the add-on EIB3000MRF SmartLINK module. Brooks also lists automatic dust compensation, a self-check of the sensor, battery and circuitry, and AudioLINK, which passes the alarm's settings and status to the AudioLINK app by sound.

The EIB650iRF: battery only, linked by radio

The EIB650iRF has a non-replaceable 10-year lithium battery and RadioLINK+ wireless interconnection for up to 12 devices. A sealed mesh screen is there to reduce insect and dust problems.

Both the EIB3016 and the EIB650iRF carry a 5-year limited warranty, and Brooks says both meet AS 3786:2014 and AS 3786:2023.

Other Brooks models

PowerWhat it senses
EIB146e230-volt, with a 9-volt alkaline backupPhotoelectric smoke
EIB660iRFBatteryPhotoelectric smoke and heat
EIB3024230-voltPhotoelectric smoke and heat

Before you choose a Brooks alarm

  • Hardwired now? Stay with a 230-volt model like the EIB3016, fitted by a licensed electrician.
  • Want mains alarms linked without cable? The EIB3016 needs the add-on SmartLINK module for that.
  • Count your alarms. Brooks' wired and RadioLINK+ links each go to 12 devices.
  • Look for AS 3786 on the label. Brooks lists both the 2014 and 2023 editions for its two main models.
  • Compare warranties if that matters to you: Brooks lists 5 years limited on the EIB3016 and EIB650iRF.

What you can do, and what's licensed work

You can

  • Put up EIB650iRF battery alarms, which need no mains wiring.
  • Press the test button on each alarm.
  • Use the AudioLINK app to read an alarm's status.

Leave to a licensed electrician

  • Installing or replacing the EIB3016, EIB146e or EIB3024.
  • Adding a SmartLINK module to a mains alarm.
  • Wiring the interconnect between mains alarms.

Where we'd land

For a home that already has 240-volt alarms, we'd ask the electrician about the EIB3016: the non-removable rechargeable backup means no yearly battery, and it keeps running for months in a blackout. For a battery home, the EIB650iRF links by radio without any wiring. Either way, keeping the whole house on Brooks keeps the linking simple.

Want a specialist to sort it?

Tell us the job and your postcode. We match the licence-checked local electrician who does this kind of work, and they call you. No ring-around, and your number goes to them alone.

Get matched

Questions

Straight answers.

How long does a Brooks EIB3016 run without mains power?

Brooks says up to 6 months on its backup battery, or up to 3 months in a wireless setup.

Do Brooks alarms detect heat?

The EIB660iRF (battery) and EIB3024 (230-volt) combine photoelectric smoke and heat sensing. The other Brooks models on this page sense smoke only.

Where this information comes from

Rules change, so check with your state regulator if something matters to your job. How we write and check these pages.

Get matched with a sparky